es1pb, es1pc & es1pd document number 88918 10-nov-05 vishay general semiconductor www.vishay.com 1 do-220aa (smp) new product high current density surface mount ultrafast rectifiers major ratings and characteristics i f(av) 1 a v rrm 100 v, 150 v, 200 v t rr 15 ns v f 0.92 v t j max. 150 c features very low profile - typical height of 1.0 mm ideal for automated placement glass passivated chip junction ultrafast recovery times for high efficiency low forward voltage, low power losses low thermal resistance meets msl level 1 per j-std-020c solder dip 260 c, 40 seconds typical applications for ues in secondary rectification and freewheeling for ultrafast switching speeds of ac-to-dc and dc-to-dc converters for both consumer and automotive appli- cations. mechanical data case: do-220aa (smp) epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002b and jesd22-b102d e3 suffix for commercial grade, he3 suffix for high reliability grade polarity: color band denotes the cathode end maximum ratings (t a = 25 c unless otherwise specified) parameter symbol es1pb es1pc es1pd unit device marking code eb ec ed maximum repetitive peak reverse voltage v rrm 100 150 200 v maximum average forward rectified current see fig. 1 i f(av) 1.0 a peak forward surge current 10 ms single half sine-wave superimposed on rated load i fsm 30 a operating junction and storage temperature range t j , t stg - 55 to + 150 c
www.vishay.com 2 document number 88918 10-nov-05 es1pb, es1pc & es1pd vishay general semiconductor electrical characteristics (t a = 25 c unless otherwise specified) thermal characteristics (t a = 25 c unless otherwise specified) notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) thermal resistance from junction to am bient and junction to lead mounted on p.c.b. with 5.0 x 5.0 mm copper pad areas. r jl is measured at the terminal of cathode band. r jc is measured at the top centre of the body ratings and characteristics curves (t a = 25 c unless otherwise specified) parameter test condition symbol value unit maximum instantaneous forward voltage at i f = 0.6 a, t j = 25 c at i f = 1 a, t j = 25 c v f 0.865 0.920 v maximum reverse current at rated v r (1) t j = 25 c t j = 125 c i r 5.0 500 a maximum reverse recovery time at i f = 0.5 a, i r = 1 a, i rr = 0.25 a t rr 15 ns typical reverse recovery time at i f = 1.0 a, v r = 30 v di/dt = 50 a/s, i rr = 10 % irm t j = 25 c at i f = 1.0 a, v r = 30 v di/dt = 50 a/s, i rr = 10 % irm t j = 100 c t rr 25 30 ns typical reverse recovery time at i f = 1.0 a, v r = 30 v di/dt = 50 a/s, i rr = 10 % irm t j = 25 c at i f = 1.0 a, v r = 30 v di/dt = 50 a/s, i rr = 10 % irm t j = 100 c q rr 8 10 nc typical junction capacitance at 4.0 v, 1 mhz c j 10 pf parameter symbol es1pb es1pc es1pd unit typical thermal resistance (2) r ja r jl r jc 105 15 20 c/w figure 1. maximum forward current derating curve 0 1.2 8 0 90 100 110 120 130 140 150 a v erage for w ard rectified c u rrent (a) lead temperat u re ( c) 0. 8 1.0 0.2 0.4 0.6 t l meas u red at the cathode b and terminal figure 2. maximum non-repetitive peak forward surge current peak for w ard s u rge c u rrent (a) nu m b er of cycles at 50 hz 1 10 100 10 20 30 0 05 15 25
es1pb, es1pc & es1pd document number 88918 10-nov-05 vishay general semiconductor www.vishay.com 3 package dimensions in inches (millimeters) figure 3. typical instantaneous forward characteristics figure 4. typical revers e leakage characteristics 0.4 0.6 0. 8 1.2 1.4 instantaneo u s for w ard v o ltage ( v ) 0.1 10 1 100 instantaneo u s for w ard c u rrent (a) 0.01 1.0 0.2 t j = 150 c t j = 25 c t j = 125 c instantaneo u s re v erse c u rrent ( a) percent of rated peak re v erse v oltag ( % ) 20 40 60 8 0 100 0.1 1 10 100 10 30 50 70 90 0.01 10000 1000 t j = 25 c t j = 125 c t j = 150 c figure 5. typical junction capacitance figure 6. typical trans ient thermal impedance re v erse v v oltage ( v ) j u nction capacitance (pf) 0.1 1 10 100 1 100 10 0.01 1 10 100 1 10 100 t, p u lse d u ration (sec.) transien thermal impedance ( c/ w ) 0.1 1000 0.000 (0.00) 0.012 (0.30) 0.013 (0.35) 0.004 (0.10) 0.01 8 (0.45) 0.006 (0.15) 0.045 (1.15) 0.033 (0. 8 5) 0.036 (0.91) 0.024 (0.61) 0.016 (0.40) 0.032 (0. 8 0) 0.053 (1.35) 0.041 (1.05) 0.012 (0.30) ref 0.105 (2.67) 0.025 (0.635) 0.100 (2.54) 0.030 (0.762) 0.050 (1.27) cathode b and 0.142 (3.61) 0.126 (3.19) 0.15 8 (4.00) 0.146 (3.70) 0.0 8 6 (2.1 8 ) 0.074 (1. 88 ) 0.0 8 7 (2.20) 0.103 (2.60) do-220aa (smp)
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
